BLU Studio Mega (2018) S910Q Firmware
Device name: BLU Studio Mega (2018)
Model: S910Q
Region: USA
Network: 4G LTE
Android OS: 8.1 Oreo (Go Edition)
Firmware version: V8.1.G.04.03 For FlashTool
Stock rom / Flash File name: BLU STUDIO MEGA 2018 S910Q_V8.1.G.04.03_GENERIC_20190226-0209 ORIROM.zip
Size: 800MB
Disclaimer
Our tutorial is for educational purpose only, all risks for your actions are your responsibility, Orirom is not responsible if your BLU Studio Mega 2018 S910Q experiencing hardbrick or Total dead, You can use the above firmware to fix software problems in BLU Studio Mega (2018) S910Q, such as Lost IMEI Baseband, cannot enter the home screen (Bootloop, hang the logo), unlock / reset PIN / lockscreen/patterns, and all repair firmware solution at your BLU Studio Mega (2018) S910Q.
How To Flash Stock rom / Firmware into BLU Studio Mega (2018) S910Q
- Youtube Video Tutorial -> here
- Make sure your mobile smartphone or tablet is BLU Studio Mega (2018) with model number S910Q running using Mediatek MT6580 chipset
- Please make do backup first before flashing the firmware
- Fill the battery at least 40%
- On The PC/Laptop/Notebook
– Download and extract the BLU Studio Mega (2018) S910Q Stockrom
– Download and Install the BLU Studio Mega (2018) S910Q USB Vcom driver
– Download and extract the SP-Flashtool, Open and run Flash_Tool.exe
– Select MT6582M_Android_scatter.txt on Flashtool and click DOWNLOAD. Usually it will automatically place the flash file exactly like. Stock KERNEL / Boot.img, recovery.img, userdata.img, lk.bin, logo.img, system and Nvram. Look at the picture:
- On your BLU Studio Mega (2018) S910Q
– Turn Off your phone
– Connect your Phone to the PC using the USB cable
– Go into Emergency Download Mode / EDL mode “Remove and re-insert the battery (If the Battery you can remove), Press Simultaneously the Volume up and Volume down (If you can’t remove the Battery)” - Wait until the installation process is complete.
- Done. Congratulations, Your BLU Studio Mega (2018) S910Q Has been repaired using Official BLU Studio Mega (2018) S910Q Stock rom / Firmware.
Notes:
- For Rooting , you need to download TWRP recovery for BLU Studio Mega (2018) S910Q and than installing SuperSU.zip on recovery mode, but usually you need to unlocking bootloder first.
- For Bypass, Unlock / FRP, Reset Google Account you can use tricks -> here
But if the problem still occurs, I recommend you to flash custom ROM for BLU Studio Mega (2018) S910Q like CyanogenMOD, LineageOS, MIUI, EUI or other via TWRP/Custom recovery mode. - If you find a problem with SP-Flashtool with Error code message, Please try to reinstall BLU Studio Mega (2018) S910Q USB Vcom Driver on your PC, try flashing using another PC 64/32bit or reconnect your device with PC.
(8038) SP FLASH TOOL ERROR
(8045) SP FLASH TOOL ERROR
(8200) SP FLASH TOOL ERROR
(4010) S_FT_FORMAT_FAILED
(6124) S_SECURITY_INVALID_PROJECT
(5066) S_DL_PC_BL_INVALID_GFH_FILE_INFOR
(5059) S_DL_PMT_ERR_NO_SPACE
(5054) S_DL_GET_DRAM_SETTINGS_FAIL
(5007) S_FTHNDFILE_IS_NOT_LOADED_YET
(5002) S_INVALID_DA_FILE
(4050) S_FT_NEED_DOWNLOAD_ALL_FAIL
(4032) S_FT_ENABLE_DRAM_FAILED
(4008) S_FT_DOWNLOAD_FAIL
(4009) S_FT_READBACK_FAIL
(4001) S_FT_DA_NO_RESPONSE
(3182) S_STORAGE_NOT_MATCH
(3066) S_DA_HANDSET_FAT_INFO_NOT-FOUND
(3144) S_DA_EMMC_FLASH_NOT-FOUND
(1040) S_UNSUPPORTED_OPERATION
(3001) S_DA_EXT_RAM_ERROR
(3013) S_DS_SOC_CHECK_FAIL
(2005) S_BROM_CMD_STARTCMD_FAIL
(3036) S_DA_INVALID_RANGE
(1003) S_COM_PORT_OPEN_FAIL
(1013) S_COM_PORT_OPEN_FAIL
(1022) S_UNSUPPOTED_VER_OF_DA
(1011) S_NOT_ENOUGH_SPACE_STORAGE_SPACE
MSP ERROR CODE : 0X00
Credits: Official BLU Support, Blu Mobile Forum Developer, XDA Developer and all android bloger and developer.